TITLE 4. Business Regulations >> DIVISION 9. DIVISION OF MEASUREMENT STANDARDS, DEPARTMENT OF FOOD AND AGRICULTURE
 4 CA ADC T. 4, Div. 12, References and Annotations
 
CHAPTER 1. TOLERANCES AND SPECIFICATIONS FOR COMMERCIAL WEIGHING AND MEASURING DEVICES
 
ARTICLE 1. NATIONAL UNIFORMITY, EXCEPTIONS AND ADDITIONS
s 4000. Application.

s 4001. Exceptions.

s 4001.1. G-S. Specifications.

s 4001.2. G-N. Notes.

s 4001.4. G-T. Tolerances.

s 4001.5. G-UR. User Requirements.

s 4001.6. D. Definitions of Terms.

s 4002. Additional Requirements.

s 4002.1. General Code (1.10.)

s 4002.2. Scales (2.20.)

s 4002.3. Vehicle-Tank Meters. (3.31.)

s 4002.4. Liquefied Petroleum Gas and Anhydrous Ammonia Liquid-Measuring Devices. (3.32.)

s 4002.4.1. T.N. Tolerances Applicable to Devices Marked I, II, III, III L, and IIII.

s 4002.5. Hydrocarbon Gas Vapor-Measuring Devices. (3.33.)

s 4002.6. Water Meters. (3.36.)

s 4002.7. Farm Milk Tanks. (4.42.)

s 4002.8. Liquid-Measuring Devices. (3.30.)

s 4003. A. Application.

s 4003.1. S. Specifications.

s 4003.2. N. Notes.

s 4003.4. T. Tolerances.

s 4003.5. UR. User Requirements.

s 4003.6. D. Definitions of Terms.

s 4004. A. Application.

s 4004.1. S. Specifications.

s 4004.2. N. Notes.

s 4004.4. T. Tolerances.

s 4005. A. Application.

s 4005.1. S. Specifications.

s 4005.2. N. Notes.

s 4005.4. T. Tolerances.

s 4005.5. UR. User Requirements.

s 4005.6. D. Definitions of Terms.

s 4006. A. Application.

s 4006.1. S. Specifications.

s 4006.2. N. Notes.

s 4006.4. T. Tolerances.

s 4006.5. UR. User Requirements.

s 4006.6.* D. Definitions of Terms.

s 4007. A. Application.

s 4007.1. S. Specifications.

s 4007.2. N. Notes.

s 4007.4. T. Tolerances.

s 4007.5. UR. User Requirements.

s 4007.6. D. Definitions of Terms.

s Table 2*. Reduction of Volume to 60 F. Against Specific Gravity 60/60 F. for Liquefied Petroleum Gases (Abridged Table).

s 4008. A. Application.

s 4008.1. S. Specifications.

s 4008.2. N. Notes.

s 4008.4. T. Tolerances.

s 4008.5. UR. User Requirements.

s 4008.6. D. Definitions of Terms.

s Table 2 *. Temperature Correction Factors.

s Table 3 *. Corrections For Pressure and Altitude.

s 4009. A. Application.

s 4009.1. S. Specifications.

s 4009.2. N. Notes.

s 4009.4. T. Tolerances.

s 4009.5. UR. User Requirements.

s 4009.6. D. Definitions of Terms.

ARTICLE 2. SPECIFICATIONS AND TOLERANCES AND OTHER TECHNICAL REQUIREMENTS FOR COMMERCIAL WEIGHING AND MEASURING DEVICES NOT INCLUDED IN HANDBOOK 44
s 4010. Application.

s 4010.1. S. Specifications.

s 4010.2. N. Notes.

s 4010.4. T. Tolerances.

s 4010.5. UR. User Requirements.

s 4010.6. D. Definitions of Terms.

s 4011. A. Application.

s 4011.1. S. Specifications.

s 4011.2. N. Notes.

s 4011.4. T. Tolerances.

s 4011.5. UR. User Requirements.

ARTICLE 2.1. LIQUEFIED PETROLEUM GAS TANKS WHEN MOUNTED ON HIGHWAY VEHICLES AND USED AS MEASURES
s 4012. A. Application.

s 4012.1. S. Specifications.

s 4012.2. N. Notes.

s 4012.4. T. Tolerances.

s 4012.5. UR. User Requirements.

s 4013. A. Application.

s 4013.1. S. Specifications.

s 4013.4. T. Tolerances.

s 4014. A. Application.

s 4014.1. S. Specifications.

s 4014.2. N. Notes.

s 4014.4. T. Tolerances.

s 4014.5. UR. User Requirements.

s 4015. A. Application.

s 4015.1. S. Specifications.

s 4015.2. N. Notes.

s 4015.4. T. Tolerances.

s 4015.5. UR. User Requirements

s 4015.6. D. Definitions of Terms.

s 4016. A. Application.

s 4016.1. S. Specifications.

s 4016.2. N. Notes.

s 4016.4. T. Tolerances.

s 4016.5. UR. User Requirements.

s 4017. A. Application.

s 4017.1. S. Specifications.

s 4017.2. N. Notes.

s 4017.4. T. Tolerances.

s 4018. A. Application.

s 4018.1. S. Specifications.

s 4018.2. N. Notes.

s 4018.4. T. Tolerances.

s 4019. A. Application.

s 4019.1. S. Specifications.

s 4019.2. N. Notes.

s 4019.4. T. Tolerances.

s 4020. A. Application.

s 4020.1. S. Specifications.

s 4020.2. N. Notes.

s 4020.4. T. Tolerances.

s 4020.5. UR. User Requirements.

s 4021. A. Application.

s 4021.1. S. Specifications.

s 4021.2. N. Notes.

s 4021.4. T. Tolerances.

s 4021.5. UR. User Requirements.

s 4022. A. Application.

s 4022.1. S. Specifications.

s 4022.4. T. Tolerances.

s 4023. A. Application.

s 4023.1. S. Specifications.

s 4023.2. N. Notes.

s 4023.4. T. Tolerances.

s 4023.5. UR. User Requirements.

s 4023.6. D. Definitions of Terms.

s 4024. A. Application.

s 4024.1. S. Specifications.

s 4024.2. N. Notes.

s 4024.4. T. Tolerances.

s 4024.5. UR. User Requirements.

s 4024.6. D. Definitions of Terms.

s 4025. A. Application.

s 4025.1. S. Specifications.

s 4025.2. N. Notes.

s 4025.4. T. Tolerances.

s 4025.5. UR. User Requirements.

s 4025.6. D. Definitions of Terms.

s 4026. A. Application.

s 4026.1. S. Specifications.

s 4026.2. N. Notes.

s 4026.4. T. Tolerances.*

s 4026.5. UR. User Requirements.

s 4026.6. D. Definitions of Terms.

ARTICLE 2.2. ELECTRIC WATT-HOUR METERS
s 4027. A. Application.

s 4027.1. S. Specifications.

s 4027.2. N. Notes.

s 4027.4. T. Tolerances.

s 4027.5. UR. User Requirements.

s 4027.6. Definitions of Terms.

s 4028. A. Application.

s 4028.1. S. Specifications.

s 4028.2. N. Notes.

s 4028.4. T. Tolerance.

s 4028.5. UR. User Requirements.

s 4028.6. D. Definitions of Terms.

ARTICLE 2.3. CARBON DIOXIDE LIQUID-MEASURING DEVICES
s 4029. A. Application.

s 4029.1. S. Specifications.

s 4029.2. N. Notes.

s 4029.4. T. Tolerances.

s 4029.5. UR. User Requirements.

s 4029.6. Definitions of Terms.
 
CHAPTER 2. SPECIAL EQUIPMENT
ARTICLE 1. COMPRESSED GAS IN CYLINDERS
s 4050. Application.

s 4051. Cylinder Labeling.

s 4052. Notes.

s 4053. Definitions.

ARTICLE 2. PROCEDURES FOR TYPE APPROVAL CERTIFICATION EVALUATION AND FIELD COMPLIANCE TESTING OF VAPOR RECOVERY SYSTEMS
s 4054. A. Application.

s 4054.1. S. Specifications.

s 4054.2. N. Notes -Type Approval Certification Evaluation.

s 4054.3. T. Tolerances.

s 4055. N. Notes-Field Compliance Testing.
 
CHAPTER 3. DEVICE INSPECTION
 
ARTICLE 1. FREQUENCY OF INSPECTION

s 4070. Frequency of Inspection.

ARTICLE 2. ALTERNATIVES TO SPECIFIED FREQUENCY OF INSPECTION
s 4071. Purpose of Article.

s 4072. Findings.

s 4073. Approval of County Plans.

s 4074. Instructions to Sealers.
 
CHAPTER 4. REGISTRATION OF SERVICE AGENCIES FOR COMMERCIAL WEIGHING AND MEASURING DEVICES
s 4080. Application.

s 4081. Registration of Service Agencies and Service Agents Required.

s 4082. Fees.

s 4083. Examinations/Licenses.

s 4084. Authority for Service Agency to Place a Device into Service.

s 4085. Responsibility of a Service Agency.

s 4086. Certification of Service Agency Standards.

s 4087. Payments to Counties.

s 4088. Advisory Committee.
 
CHAPTER 5. BILLING FOR UTILITY SERVICES
s 4090. Billing for Utility Service.
 
CHAPTER 6. AUTOMOTIVE PRODUCTS SPECIFICATIONS
 
ARTICLE 1. BRAKE FLUID STANDARDS
s 4100. Specifications.

ARTICLE 2. BRAKE FLUID LABELING
s 4110. Official Sample.

s 4111. Change of Formula or Brand Designation.

s 4112. Container Labeling.

ARTICLE 3. AUTOMATIC TRANSMISSION FLUID STANDARDS
s 4120. Specifications.

s 4120.1. Definitions.

s 4121. Basic Tests for Automatic Transmission Fluid.

BASIC TESTS
s 4122. Compatibility.

s 4122.1. Viscosity.

s 4122.2. Flash Point, C.O.C., C.

s 4122.3. Fire Point, C.O.C., C.

s 4122.4. Copper Strip Corrosion Test.

s 4122.5. Foaming Test.

s 4122.6. Corrosion and Rusting Test.

s 4122.7. Effect on Seals.

s 4122.8. Oxidation Stability Test.

s 4122.9. Shear Test.

LOW-TEMPERATURE VISCOSITY TEST PROCEDURE
s 4123. Scope.

s 4123.1. Outline of Method.

s 4123.2. Apparatus.

s 4123.3. Procedure.

s 4123.4. Report.

TEST PROCEDURE FOR EFFECT ON SEAL MATERIALS
s 4124. Scope.

I. TOTAL IMMERSION TEST
s 4124.1. Outline of Method.

s 4124.2. Apparatus.

s 4124.3. Procedure.

s 4124.4. Report.

II. DIP CYCLE TEST
s 4124.5. Outline of Method.

s 4124.6. Apparatus.

s 4124.7. Procedure.

s 4124.8. Report.

III. TIP CYCLE TEST
s 4124.9. Outline of Method.

s 4124.10. Apparatus.

s 4124.11. Procedure.

s 4124.12. Report.

OXIDATION STABILITY TEST PROCEDURE
s 4125. Scope.

SHEAR TEST PROCEDURE
s 4126. Scope.

ARTICLE 4. AUTOMATIC TRANSMISSION FLUID REGISTRATION
s 4130. Official Sample.

ARTICLE 5. ENGINE FUEL STANDARDS
s 4140. Specifications -Automotive Spark Ignition Engine Fuel.

s 4141. Specifications-Kerosene.

s 4142. Specifications -Fuel Oil.

s 4143. Specifications -Diesel Fuel.

s 4144. Specifications -Developmental Fuels.

s 4145. Specifications -E85 Ethanol Fuel.

s 4146. Specifications -M85 Methanol Fuel.

s 4147. Specifications - Biodiesel Blending Stock and Biodiesel Fuel Blends.

s 4148. Labeling and Price Advertising Sign Requirements for Biodiesel.

ARTICLE 6. ENGINE OIL LABELING AND EXEMPTIONS
s 4150. Labeling.

s 4151. Exemptions -Prediluted Oil.

s 4152. Tolerances.

ARTICLE 7. LABELING AND SPECIFICATIONS OF ENGINE COOLANTS
s 4160. Definitions Used in This Article.

s 4161. Labeling.

s 4162. Specifications - Glycol Base Virgin Engine Coolant and Virgin Prediluted Engine Coolant for Automobiles and Light Duty Service.

s 4163. Specifications - Recycled Glycol Base Engine Coolant for Automobiles and Light Duty Service.

s 4164. Specifications - Recycled and Reconditioned Glycol Base Prediluted Engine Coolant for Automobiles and Light Duty Service.

s 4165. Exemptions - Reserve Alkalinity.

s 4166. Variance from Chloride Standard - Specifications for Recycled Engine Coolant.

s 4167. Variance from Chloride Standard - Specifications for Recycled Prediluted Engine Coolant or Reconditioned Engine Coolant.

s 4168. Availability of ASTM Standards and Test Procedures.

s 4169. Evaluation of Test Results.

s 4170. Verification of Claim for Recycled Engine Coolant.

s 4171. Verification of Claim for Recycled Prediluted Engine Coolant or Reconditioned Engine Coolant.

s 4172. Evaluation of Storage Stability and Compatibility of Recycled Prediluted Engine Coolant.

s 4173. Evaluation of Electrochemical Pitting of Recycled Prediluted Engine Coolant.

s 4174. Evaluation of Test Results.

s 4175. Definitions - As Used in This Article.
 
CHAPTER 7. ADVERTISING OF GASOLINE AND OTHER MOTOR VEHICLE FUELS
s 4200. Advertising Medium.

s 4201. Price Sign Display on Dispensing Apparatus.

s 4202. Illumination.
 
CHAPTER 8. MOTOR OIL FEE
s 4300. Definition of "Motor Oil" and Other Terms for Purposes of Fee Responsibility.

s 4302. Fee Responsibility and Exemption.

s 4304. Fees and Returns.

s 4306. Penalties.

s 4307. Refund of Fees Paid.

s 4308. Records.
 
CHAPTER 9. WEIGHMASTER ENFORCEMENT
 
ARTICLE 1. GENERAL PROVISIONS
s 4400. Definition.

s 4401. Licenses.

ARTICLE 2. WEIGHMASTER CERTIFICATES
s 4410. Recording Procedures.

s 4411. Procedures for Voiding and Correcting.

s 4412. Transfer of Weight, Measure or Count.

s 4413. Certificates Issued on Information Furnished by Another Party.

s 4414. Names of Weighmasters Using Automatic Weighing, Measuring or Counting Systems.

s 4415. Weighing Vehicles with All Persons off the Scale.

ARTICLE 3. PREDETERMINED INDIVIDUAL TARE WEIGHTS
s 4420. Predetermined Individual Tare Weight.

s 4421. Establishing.

s 4422. Certificate Requirements.

s 4423. Conditions of Use.

ARTICLE 4. SEASONAL TARE WEIGHTS
s 4430. Seasonal Tare Weight.

s 4431. Establishing.

s 4432. Certificate Requirement.

s 4433. Conditions of Use.

ARTICLE 5. COMMON TARE WEIGHTS
s 4440. Common Tare Weight.

s 4441. Establishing.

s 4442. Sample Size.

s 4443. Rounding Procedures.

s 4444. Certificate Requirements.

s 4445. Conditions of Use.

s 4446. Verification and Enforcement.

ARTICLE 6. LIMITS OF PERMISSIBLE ERROR
s 4450. Tolerance Levels.

ARTICLE 7. AVERAGE TARE WEIGHTS
s 4460. Average Tare Weight.

s 4461. Establishing.

ARTICLE 8. VOLUMETRIC CONVERSION TO WEIGHT OF SQUID
s 4470. Container Requirements.

s 4471. Container Markings.

s 4472. Certificate Requirements.

ARTICLE 9. DIRECTOR'S APPROVAL OF INSPECTION OF WEIGHMASTER RECORDS
s 4480. Application.

s 4481. Definition of Designated Agent.

s 4482. Information Required by the Director.

s 4483. Approval of Request.

s 4484. Denial of Request.

s 4485. Applicability-District Attorney.

s 4486. Applicability-Other Law Enforcement Agencies.

ARTICLE 10. TIMBER TARE WEIGHTS
s 4490. Definitions.

s 4491. Establishing.

s 4492. Certificate Requirements.

s 4493. Conditions of Use.

ARTICLE 11. MULTIPLE DRAFT WEIGHING OPERATIONS
s 4495. Application.

s 4495.1. Definitions.

s 4495.2. Request for Authorization.

s 4495.3. Conditions of Use.

s 4495.4. Certificate Requirements.

s 4495.5. Establishment and Tolerance.

s 4495.6. Verification and Enforcement.
 
CHAPTER 10. QUANTITY CONTROL
ARTICLE 1. GENERAL
s 4500. Standards for Fresh Berries.

s 4501. Fish Sales by Weight.

s 4502. Wood for Fuel Purposes.

s 4503. Gravimetric Testing of Fluid Products and Products Sold by Count.

ARTICLE 2. UNIFORM PACKAGING AND LABELING REGULATION

s 4510. Application.

s 4511. Exceptions.

s 4512. Additional Requirements.

s 4512.1. Polyethylene Products.

s 4512.2. Animal Bedding.

s 4512.3. Enforcement.

s 4513. Declaration of Identity: Consumer Package.

s 4513.1. Parallel Identity Declaration: Consumer Package.

s 4514. Declaration of Identity: Nonconsumer Package.

s 4515. Declaration of Responsibility: Consumer and Nonconsumer Packages.

s 4516.* Declaration of Quantity: Consumer Packages.

s 4516.1.* Largest Whole Unit.

s 4516.2.* Net Quantity.

s 4516.2.1. Use of "Net Weight."

s 4516.2.2. Lines of Print or Type.

s 4516.3. Terms: Weight, Liquid Measure, Dry Measure, or Count.

s 4516.3.1. Combination Declaration.

s 4516.4. Inch-Pound Units: Weight, Measure.

s 4516.4.1. Symbols and Abbreviations.

s 4516.4.2. Units of Two or More Meanings.

s 4516.5. Metric Units: Weight, Measure.

s 4516.5.1. Symbols.

s 4516.6. Prescribed Units, Inch-Pound System.

s 4516.6.1.* Less than 1 Foot, 1 Square Foot, 1 Pound or 1 Pint.

s 4516.6.2.* Weight: Dual Quantity Declaration.

s 4516.6.3. Liquid Measure: Dual Quantity Declaration.

s 4516.6.4. Length Measure: Dual Quantity Declaration.

s 4516.6.5. Area Measure: Dual Quantity Declaration.

s 4516.6.6. Four Feet, Four Square Feet, Four Pounds, One Gallon, or More.

s 4516.6.7. Bidimensional Commodities.

s 4516.7. Prescribed Units, Metric System.

s 4516.7.1.* Less than 1 Meter, 1 Square Meter, 1 Kilogram, or 1 Liter.

s 4516.7.2. One Meter, 1 Square Meter, 1 Liter or More.

s 4516.7.3. Bidimensional Commodities.

s 4516.8.* Count: Ply.

s 4516.9. Fractions.

s 4516.10. Supplementary Declarations.

s 4516.10.1. Supplementary Quantity Declarations.

s 4516.10.2. Combined Metric and Inch-Pound Declarations.

s 4516.10.3. Rounding.

s 4516.11. Qualification of Declaration Prohibited.

s 4517. Declaration of Quantity. Nonconsumer Packages; General.

s 4517.1. Location.

s 4517.2. Terms: Weight, Liquid Measure, Dry Measure, or Count.

s 4517.3. Inch-Pound Units: Weight, Measure.

s 4517.3.1. Symbols and Abbreviations.

s 4517.4. Metric Units: Weight, Measure.

s 4517.4.1. Symbols.

s 4517.5.* (Reserved)

s 4518. Prominence and Placement: Consumer Packages.

s 4518.1. General.

s 4518.1.1. Location.

s 4518.1.2. Style of Type or Lettering.

s 4518.1.3. Color Contrast.

s 4518.1.4. Free Area.

s 4518.1.5. Parallel Quantity Declaration.

s 4518.2. Calculation of Area of Principal Display Panel for Purposes of Type Size.

s 4518.2.1. Minimum Height of Numbers and Letters.

s 4518.2.2. Numbers and Letters: Proportion.

s 4519. Prominence and Placement: Nonconsumer Packages.

s 4520. Requirements: Specific Consumer Commodities, Nonconsumer Commodities, Packages,
Containers.

s 4520.1. Display Card Package.

s 4520.2.* (Reserved)

s 4520.3. Aerosols and Similar Pressurized Containers.

s 4520.4. Multi-Unit Packages.

s 4520.5. Combination Packages.

s 4520.6. Variety Packages.

s 4520.7. Cylindrical Containers.

s 4520.8. Measurement of Container-Type Commodities, How Expressed.

s 4520.8.1.* General.

s 4520.8.2. Capacity.

s 4520.8.3.* Terms.

s 4520.8.4.* Polyethylene Commodities.

s 4520.8.4.1.* Polyethylene Sheeting, Bags, Lay Flat Tubing, Sheets, Drop Cloths and
Tarpaulins.

s 4520.8.4.2.* Quantity Declarations.

s 4520.8.4.3.* Exemptions.

s 4520.9. Textile Products, Threads, and Yarns.

s 4520.9.1.* Wearing Apparel.

s 4520.9.2.* Textiles.

s 4520.9.3.* (Reserved)

s 4520.9.4.* Exemption: Variety Textile Packages.

s 4520.9.5.* Sewing Threads, Handicraft Threads, and Yarns.

s 4520.10.* Packaged Seed.

s 4521. Exemptions.

s 4521.1. General.

s 4521.2.* Random Packages.

s 4521.3.* Small Confections.

s 4521.4.* Individual Servings.

s 4521.5.* Cuts, Plugs, and Twists of Tobacco and Cigars.

s 4521.6.* Reusable (Returnable) Glass Containers.

s 4521.7.* Cigarettes and Small Cigars.

s 4521.8.* Packaged Commodities with Labeling Requirements Specified in Federal Law.

s 4521.9.* Fluid Dairy Products, Ice Cream, and Similar Frozen Desserts.

s 4521.10. Single Strength and Less Than Single Strength Fruit Juice Beverages, Imitations
Thereof, and Drinking Water.

s 4521.11.* Soft-Drink Bottles.

s 4521.12. Multi-Unit Soft-Drink Packages.

s 4521.13. Butter.

s 4521.14.* Eggs.

s 4521.15.* Flour.

s 4521.16.* Small Packages.

s 4521.17.* Decorative Containers.

s 4521.18.* Combination Packages.

s 4521.19.* Margarine.

s 4521.20.* Corn Flour and Corn Meal.

s 4521.21.* Prescription and Insulin-Containing Drugs.

s 4521.22.* Camera Film.

s 4521.23.* Paints and Kindred Products.

s 4521.24. Automotive Cooling System Antifreeze.

s 4521.25.* Motor Oils.

s 4521.26.* Pillows, Cushions, Comforters, Mattress Pads, Sleeping Bags, and Similar Products.

s 4521.27. Commodities' Variable Weights and Sizes.

s 4521.28. Packaged Commodities Sold by Count.

s 4521.29.* Fishing Lines and Reels.

s 4522.* Enforcement.

ARTICLE 3. WOOD FOR FUEL PURPOSES

s 4530. Definitions.

s 4531. Method of Sale.

s 4532. Invoice.

s 4533. Kindling.

s 4534. Identity.

s 4535. Volumetric Test Procedure for Bulk Firewood.

s 4535.1. Stacking:

s 4535.2. Measuring:

s 4535.3. Calculate the volume:

s 4536. Volumetric Test Procedure for Packaged Firewood With a Labeled Net Content of Four
Cubic Feet or Less.

s 4536.1. Boxed Firewood.

s 4536.2. Bundles and Bags of Firewood.
 
CHAPTER 11. SAMPLING AND TESTING PROCEDURES FOR DETERMINING THE NET CONTENTS OF PACKAGED COMMODITIES
ARTICLE 1. DEFINITIONS
s 4600. National Uniformity.

s 4601. Commodity.

s 4602. Declaration of Identity.

s 4603. Distribution.

s 4604. Error.

s 4605. Established Gray Area (EGA).

s 4606. Gross Weight.

s 4607. Inspection Lot.

s 4608. Lot.

s 4609. Maximum Allowable Variation (MAV).

s 4610. Moisture Loss.

s 4611. Moisture Loss Allowance (MLA).

s 4612. Net Weight.

s 4613. (Reserved).

s 4614. Packaged Commodity.

s 4615. Random Pack.

s 4616. Random Sample.

s 4617. Range (R).

s 4618. Sample.

s 4619. Sample Error Limit (SEL).

s 4620. Sample Size.

s 4621. Standard of Identity.

s 4622. Standard Pack.

s 4623. (Reserved).

s 4624. Subgroup.

s 4625. Tare.

s 4626. Unreasonable Error.

ARTICLE 2. SAMPLING AND TESTING PROCEDURES FOR DETERMINING THE NET
CONTENTS OF PACKAGED COMMODITIES

s 4650. Application.

s 4651. (Step 1).

s 4652. Procedures Common to All Groups.

s 4652.1. (Step 2) Sampling Criteria.

s 4652.2. (Step 3) Sample Selection.

s 4652.3. (Step 4) Average Tare Determination.

s 4652.4. (Step 5) Recording of Package Errors.

s 4652.5. (Step 6) Total Error (TE) Determination.

s 4652.6. Continuing Procedures for Group A, B, or C.

s 4653. Additional Procedures for Group A Type Commodities.

s 4653.1. (Step 7) Average Error Determination.

s 4653.2. (Step 8) Determination of Lot Compliance.

s 4653.3. 100 Percent Inspection.

s 4654. Additional Procedures for Group B Type Commodities.

s 4654.1. (Step 7) Computation of Gray Area.

s 4654.2. (Step 8) Average Error Determination.

s 4654.3. (Step 9) Determination of Lot Compliance.

s 4654.4. 100 Percent Inspection.

s 4655. Additional Procedures for Group C Type Commodities.

s 4655.1. (Step 7) Computation of Moisture Loss Allowance.

s 4655.2. (Step 8) Average Error Determination.

s 4655.3. (Step 9) Determination of Lot Compliance.

s 4655.4. 100 Percent Inspection.

s 4656. Off Sale Procedure.

s 4657. Enforcement Action on Lots of 250 or Fewer Packages.
 
CHAPTER 12. ADMINISTRATION
ARTICLE 1. PERMIT REFORM ACT
s 4700. Permit Processing Times (including Licenses, Permits, Registrations and Certificates).

s 4701. Appeal Procedure.

ARTICLE 2. WEIGHTS AND MEASURES PENALTY GUIDELINES
s 4800. Notice of Proposed Action and Disposition.

s 4801. Admission.

s 4802. Penalty Guidelines.

ARTICLE 3. APPLICANT VERIFICATION REGULATIONS
s 4900. Limitations on Licensure of Aliens.

Appendix A
 
Home | About Us | Contact Form | Contact Us | Useful Links


© Copyright 2006, Result Oriented Marketing, Inc.
For Further Assistance Visit : www.mcmillanlaw.us and www.fearnotlaw.com